Star Cool · Cold treatment

USDA probe for Star Cool reefer containers

NTC pulp probes for cold treatment on Star Cool reefer containers. Tested one by one, supplied with batch traceability and configured for your units before production.

Compatible replacement for the Star Cool USDA sensor 818555C (NTC, 2.5 mm). See every equivalent part number in the USDA sensor cross-reference.

USDA probe with black PUR cable and stainless steel tip for Star Cool reefer containers
How it works

How Star Cool reefers record cold treatment

Star Cool reefers are built by Maersk Container Industry (MCI). Like standard marine reefer containers, they have four connections for USDA temperature probes. When a USDA probe is calibrated, the controller logs the event with the old and the new offset.

01

Four USDA connections

Standard marine reefers, including Star Cool units, provide four USDA probe connections.

02

Calibration in the log

Each USDA sensor calibration is recorded with its old and new offset, so the history can be reviewed.

03

NTC probes

We confirm the sensor characteristic and connector for your Star Cool units before production.

Calibration

Calibrating USDA probes on Star Cool units

USDA probes are calibrated by immersing them in an ice-water bath. The controller stores a new offset for each probe and records it in the event log. Because the controller assumes the bath is exactly 0.00 °C, the quality of the bath determines the quality of the stored offset.

Always follow the calibration procedure and acceptance limits in the manufacturer's documentation for your controller and software version.

Product

Our USDA probe for Star Cool

We confirm the controller, the USDA sensor setting and the connector for your Star Cool units before production, so every probe arrives ready to calibrate and use.

Sensing elementNTC thermistor
Probe bodySS316, 2.5 mm OD
Cable15 m PUR, black
VerificationEvery finished probe

Frequently asked questions

Are your USDA probes used on Star Cool reefers?

Yes. Our USDA probes are used on Star Cool units. Send us the unit and controller details and we confirm the configuration before production.

How many USDA probes does a Star Cool reefer have?

Standard marine reefers, Star Cool included, have four USDA probe connections. The treatment protocol defines how many probes are used and where.

Can I check past calibrations on a Star Cool unit?

The controller logs each USDA sensor calibration with the old and new offset. Keep your own record of the bath temperature as well, so a later deviation can be traced to the probe, the bath or the controller.

Need USDA probes for your Star Cool fleet?

Send us the reefer model, controller, quantity and destination market. We confirm the configuration and reply with pricing.

Reference price: USD 18 per probe (15 m cable).

USDA PROBE is an independent manufacturer and is not affiliated with or endorsed by the United States Department of Agriculture, Carrier Transicold, Thermo King, Maersk Container Industry (Star Cool) or Daikin. Brand names are used only to identify equipment platforms. Product suitability should be verified for each equipment model and treatment program.