Daikin · Cold treatment

USDA probe for Daikin reefer containers

NTC pulp probes designed for cold treatment on Daikin reefer containers. We confirm the configuration for your units, test every probe and document every batch.

Compatible with Daikin reefers set to USDA Sensor Type = NTC (NTC, 3-pin receptacle). Daikin has no single OEM part number for this sensor; see the USDA sensor cross-reference.

USDA probe with black PUR cable and stainless steel tip for Daikin reefer containers
How it works

USDA probes on Daikin reefers

Daikin reefer units, such as the LXE10E series, are used in cold-treatment programs worldwide. The number of USDA inputs, the sensor characteristic and the connector depend on the unit model and controller software, so we confirm the configuration with you before production.

01

Designed for Daikin

Our USDA probe is designed for Daikin reefer equipment and treatment programs.

02

Configuration first

Unit model, controller software, sensor characteristic and connector are confirmed before we produce.

03

Same calibration principle

As with every reefer brand, probes are checked in an ice bath and the offsets are stored before loading.

Calibration

Calibrating USDA probes on Daikin units

Follow the calibration procedure in the operation manual of your Daikin unit. The principle is the same as on every reefer: an ice-point bath verified near 0.00 °C with a calibrated thermometer, stable readings, and offsets stored in the controller before the fruit is loaded.

Always follow the calibration procedure and acceptance limits in the manufacturer's documentation for your controller and software version.

Product

Our USDA probe for Daikin

We confirm the controller, the USDA sensor setting and the connector for your Daikin units before production, so every probe arrives ready to calibrate and use.

Sensing elementNTC thermistor
Probe bodySS316, 2.5 mm OD
Cable15 m PUR, black
VerificationEvery finished probe

Frequently asked questions

Are your USDA probes compatible with Daikin reefers?

Our USDA probes are designed for Daikin. Compatibility depends on the unit model, controller software and connector, and we confirm it case by case before production.

What do you need to confirm a Daikin configuration?

The unit model, the controller and software version if available, a photo of the USDA probe connector and the quantity required.

How should USDA probes be calibrated on a Daikin unit?

Follow Daikin's procedure for your unit. Verify the ice bath with a calibrated reference thermometer before accepting offsets: the controller cannot detect an error in the bath.

Need USDA probes for your Daikin fleet?

Send us the reefer model, controller, quantity and destination market. We confirm the configuration and reply with pricing.

Reference price: USD 18 per probe (15 m cable).

USDA PROBE is an independent manufacturer and is not affiliated with or endorsed by the United States Department of Agriculture, Carrier Transicold, Thermo King, Maersk Container Industry (Star Cool) or Daikin. Brand names are used only to identify equipment platforms. Product suitability should be verified for each equipment model and treatment program.